| Network
Products |
| Cable |
|
| Cat5e
UTP Cable |
| Specification
|
Category
5e |
| Frequency
|
100
MHz |
| Attenuation
(Min. at 100 MHz) |
22
dB |
| Characteristic
Impedance |
100
ohms ± 15% |
| NEXT
(Min. at 100 MHz) |
35.3
dB |
| PS-NEXT
(Min. at 100 MHz) |
32.3
dB |
| ELFEXT
(Min. at 100 MHz) |
23.8
dB |
| PS-ELFEXT
(Min. at 100 MHz) |
20.8
dB |
| Return
Loss (Min. at 100 MHz) |
20.1
dB |
| Delay
Skew (Max. per 100 m) |
45
ns |
|
| |
| Cat6
UTP Cable |
|
| Specification
|
Category
6 |
| Frequency
|
250
MHz |
| Attenuation
(Min. at 100 MHz) |
19.8
dB |
| Characteristic
Impedance |
100
ohms ± 15% |
| NEXT
(Min. at 100 MHz) |
44.3
dB |
| PS-NEXT
(Min. at 100 MHz) |
42.3
dB |
| ELFEXT
(Min. at 100 MHz) |
27.8
dB |
| PS-ELFEXT
(Min. at 100 MHz) |
24.8
dB |
| Return
Loss (Min. at 100 MHz) |
20.1
dB |
| Delay
Skew (Max. per 100 m) |
45
ns |
|
| |
 |
Cat5e
STP Cable |
| Specification
|
Category
5e |
| Frequency
|
100
MHz |
| Attenuation
(Min. at 100 MHz) |
22
dB |
| Characteristic
Impedance |
100
ohms ± 15% |
| NEXT
(Min. at 100 MHz) |
35.3
dB |
| PS-NEXT
(Min. at 100 MHz) |
32.3
dB |
| ELFEXT
(Min. at 100 MHz) |
23.8
dB |
| PS-ELFEXT
(Min. at 100 MHz) |
20.8
dB |
| Return
Loss (Min. at 100 MHz) |
20.1
dB |
| Delay
Skew (Max. per 100 m) |
45
ns |
|
| |
| Information
Outlets |
| UTP
Cat-5 |
|
| Channel
Performance Specifications exceed not only the TIA 568B.2 &
ISO 11801 Edition 2 for Category 5e/Class D cabling systems
but also are capable of providing stable and continual performance
upto 200 Mhz.. |
|
| |
|
UTP
Cat-6 |
| Channel
Performance specifications exceed not only the TIA 568B.2-1
& ISO 11801 Category Class E cabling systems but also are
capable of providing stable and continual performance up to
500 MHz. |
|
| |
| Surface
Mount Box |
|
| •
CAT5e rated |
| •
Universal TIA/EIA 568A or TIA/EIA 568B Wiring specification
|
| •
PC Board Construction |
| •
110 and Krone terminations |
|
| |
| |
RJ-45
Connectors |
| The
RJ-45 connector is commonly used for network cabling and for
telephony applications. It's also used for serial connections
in special cases. Here's a look at it: Although used for a variety
of purposes, the RJ-45 connector is probably most commonly used
for 10Base-T and 100Base-TX Ethernet connections. |
|
| |
| Patch
Cords |
| Straight |
|
| Connects
any CAT5 or CAT6 application such as computer to hub, patch
panel or wall jack. This PVC stranded patch cord meets TIA/EIA
568A specifications, and support all CAT5 & CAT6 high speed
applications such as 1Gig and 10GigEthernet. |
|
| |
 |
Cross
Over |
| Connects
any CAT5 or CAT6 application such as computer to computer, hub
to hub or any applications where crossover pinout is required.
This PVC stranded patch cord meets TIA/EIA 568A specifications,
and support all CAT5 & CAT6 high speed applications such
as Giga-Ethernet. |
|
| |
| Patch
Panels Modular UTP |
|
•
Meets or exceeds Category 5e requirements in TIA/EIA-568-B and
Class E requirements in ISO/IEC 11801-B
• Panels contain both Universal T568A and T568B Wiring
Configurations White IDC 110 punch down modules
• Color-coded front window labeling for easy port identification
• Termination standoff for optional grounding
• Panels have a universal T568A and T568B wiring card
for 110 style IDC Terminations
• Mounts on a standard 19" equipment rack |
|
| |
|
Patch
Panel Keystone UTP
|
•
Meets or exceeds Category 5e requirements in TIA/EIA-568-B and
Class E requirements in ISO/IEC 11801-B
• Panels contain both Universal T568A and T568B Wiring
Configurations White IDC 110 punch down modules
• Color-coded front window labeling for easy port identification
• Termination standoff for optional grounding
• Panels have a universal T568A and T568B wiring card
for 110 style IDC Terminations
• Mounts on a standard 19" equipment rack |
|
| |
| OPTICAL
FIBER PRODUCTS |
|
| |
|
| |
SM
SC Connectors |
|
Singlemode
Fiber Optic Cable Assembly Specifications |
Connector
/ Polish |
Insertion
Loss
dB @ 1300nm
|
Reflectance
dB @ 1300 nm
|
Ferrule
Material |
Typical |
Max. |
Typical |
Max. |
ST
/ PC |
0.25 |
0.35 |
<=-50 |
<=-45 |
Ceramic |
ST
/ UPC |
0.25 |
0.35 |
<=-57 |
<=-55 |
Ceramic |
SC
/ PC |
0.25 |
0.35 |
<=-50 |
<=-45 |
Ceramic |
SC
/ UPC |
0.25 |
0.35 |
<=-57 |
<=-55 |
Ceramic |
SC
/ APC |
0.25 |
0.35 |
<=-65 |
<=-60 |
Ceramic |
LC
/ PC |
0.25 |
0.35 |
<=-50 |
<=-45 |
Ceramic |
LC
/ UPC |
0.25 |
0.35 |
<=-57 |
<=-60 |
Ceramic |
MT-RJ
/ PC |
0.25 |
0.35 |
<=-50 |
<=-45 |
Ceramic |
MT-RJ
/ UPC |
0.25 |
0.35 |
<=-57 |
<=-60 |
Ceramic |
FC
/ PC |
0.25 |
0.35 |
<=-50 |
<=-45 |
Ceramic |
FC
/ UPC |
0.25 |
0.35 |
<=-57 |
<=-55 |
Ceramic |
FC
/ APC |
0.25 |
0.35 |
<=-65 |
<=-60 |
Ceramic |
General
Specifications |
Maximum
tensile load |
100
N/cm |
Loaded
min. bend radius |
5
cm |
Unloaded
min. bend radius |
3
cm |
Crush
resistance |
750
N/cm |
Impact
resistance |
1000
cycles |
Flex
resistance |
7500
cycles |
|
Multimode
Fiber Optic Cable Assembly Specifications |
Connector |
Insertion
Loss
dB @ 850 nm
|
Ferrule
Material |
Typical |
Max. |
ST |
0.3 |
0.5 |
Ceramic |
SC |
0.3 |
0.5 |
Ceramic |
MT-RJ |
0.3 |
0.7 |
Thermoplastic |
LC |
0.3 |
0.5 |
Ceramic |
FC |
0.3 |
0.5 |
Ceramic |
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
| Media
Convectors |
|
Single
Mode |
Features
• Complies with IEEE 802.3, 802.3u,
802.3x standards
• Converts between UTP cabling and Fiber
Optic cabling
• One RJ-45 connector, Auto-MDI/MDIX* for UTP port
• Supports 10/100 Mbps Auto-negotiation for UTP port
• Fiber cabling connectivity up to 60Km
• Uses store-and-forward switching to separatecollision
domains
• One fiber connector (SC/Single Mode, SC orST/Multi-Mode)
for 100Base-FX
• Prevents packet loss by supporting backpressure&
flow control
• Four DIP-switches for operation mode setupand Link-Loss
Forwarding function
• Per port LEDs for diagnosis and maintenance
• External DC power adapter, 5V/2.5A
• Can be mounted in chassis or used
as stand-alone
• FCC Class A, CE Mark certification
|
|
| |
|
Multi
Mode |
Features
• Complies with IEEE 802.3, 802.3u,
802.3x standards
• Converts between UTP cabling and Fiber
Optic cabling
• One RJ-45 connector, Auto-MDI/MDIX* for
UTP port
• Supports 10/100 Mbps Auto-negotiation for
UTP port
• Fiber cabling connectivity up to 60Km
• Uses store-and-forward switching to separate
collision domains
• One fiber connector (SC/Single Mode, SC or
ST/Multi-Mode) for 100Base-FX
• Prevents packet loss by supporting backpressure
& flow control
• Four DIP-switches for operation mode setup
and Link-Loss Forwarding function
• Per port LEDs for diagnosis and maintenance
• External DC power adapter, 5V/2.5A
• Can be mounted in chassis or used
as stand-alone
• FCC Class A, CE Mark certification |
|
| |
|
4
panel Wall Mount Fiber Termination Box
4 panel wall mount
fiber distribution box.
Supports up to 4 Standard Adapter panels with 6, 8 or 12 fiber
terminations.
Box Dimentions: 11.5"H x 13"W x 3.5"D
|
|
| |
4
panel Rack Mount Fiber Termination Box
Features:
• Durable steel construction
• Available in Black powder coated finish for scratch
and corrosion resistance
• Universally mountable with reversible mounting brackets
• Swing out or slide out main panel design for greater
access to connectors and splices
• Patching and splicing capabilities
• Removable front panel for increased access
|
|
|
| |
| Network
Racks |
|
6
U Wall Mounting Rack |
|
The "Ready to use" enclosures
it more easy for Customers. The sleek look with sturdy construction
and vents for air circulation means that these enclosures
can be used for various wall mounting application.
It enables easy mounting of the components to fit into your
applications. From consistent Steel profiles to precision-engineered
panels with the highest tolerances for fit and finish in the
industry, the racks are simply the finest Indian modular racks
available; in big range of sizes for single- and baying applications.
The
Networking racks come with front glass door, rear door and
side covers partially perforated for cross flow of ambient
air. The recess rails give flexibility of placing the 19"
channels from front to rear at a pitch of 25mm.
We
provides 6U, 9U, 12U, 16U, 36U racks.
|
|
| |
| Switches
: We provides Managed
& Unmanaged LAN Switches & Also provides KVM switches |
| Unmanaged
Switch |
|
| TECHNICAL
SPECIFICATIONS |
| *** |
•
General |
| Standards |
•
IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast
• Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit
• Ethernet (twisted-pair copper)
• ANSI/IEEE 802.3 NWay auto-negotiation
• IEEE 802.3x Flow Control |
| Protocol |
CSMA/CD |
| Data
Transfer Rates |
•Ethernet:
10Mbps (half-duplex) 20Mbps (full-duplex)
• Fast Ethernet: 100Mbps (half-duplex) 200Mbps
(full-duplex)
• Gigabit Ethernet: 2000Mbps (full duplex)
|
| Topology |
•
Star |
| Network
Cables |
• 10BASE-T: UTP Cat. 3, 4, 5 (100 m max.) EIA/TIA-586
100-ohm STP (100 m max.)
• 100BASE-TX, 1000BASE-T: UTP Cat. 5, Cat. 5e
(100 m max.) EIA/TIA-568 100-ohm STP (100 m max.) |
| Number
of Ports |
• 10/100Mbps port x 24
•10/100/1000Mbps port x 2 |
| Media
Interface Exchange |
•
Auto MDI/MDI-X for each port |
| Twisted-pair
Rx Reverse Polarity |
• Auto-correction for each port |
| Status/Diagnostic
LEDs |
• Per device: Power
• Per port: Link/Activity 100Mbps speed (10/100Mbps
ports) 100Mbps, 1000Mbps speeds (10/100/1000Mbps ports)
Status
|
| *** |
•
Performance |
| Transmission
Method |
•
Store-and-forward |
| Switch
Fabric |
•
Non-blocking
• 8.8Gbps
|
| Filtering
Address Table |
•
8K entries per device |
| MAC
Address Learning |
• Automatic update |
| Packet
Filtering Rates |
•
10BASE-T: 14,880 pps per port (half-duplex)
• 100BASE-TX: 148,810 pps per port (half-duplex)
• Gigabit Ethernet: 1,488,100 pps per port
|
| Packet
Forwarding Rates |
•
10BASE-T: 14,880 pps per port (half-duplex)
• 100BASE-TX: 148,810 pps per port (half-duplex)
• Gigabit Ethernet: 1,488,100 pps per port
|
| RAM
Buffer |
•
320KBytes per device |
| *** |
•
Physical & Environmental |
| Power
Supply |
•
100 - 240 VAC, 50/60 Hz 0.3A Internal universal power
supply |
| Power
Consumption |
•
15.68 watts |
| Ventilation |
• 40 x 40 mm DC fan x 1 |
| Operating
Temperature |
•
0 -40 C (32 -104 F) |
| Storage
Temperature |
• -10 -70 C (12 -158 F) |
| Humidity |
•
5% - 90% RH non-condensing |
| Dimensions |
•
440 (W) x 200 (D) x 44 (H) mm (17.3 x 7.8 x 1.73 inches)
19-inch rack-mount width, 1 U height |
| Weight |
•
2.8 kg (6.17 lb.) |
| Emission
(EMI) |
•
FCC Class A
• CE Class A
• VCCI Class A
• C-Tick |
| Safety |
•
CUL |
| We
provide 8, 16, 24, 48 port Unmanaged Switches |
|
|
| |
| Managed
Switches |
|
| TECHNICAL
SPECIFICATIONS |
| DES-3526 |
•
(24) ports 10/100BASE-T plus 2 Combo 10/100/1000Mbps
Copper/ SFP ports* with optional redundant power supply |
| MAC
Address Table Size |
•
8,000 |
| Switch
Fabric |
•
8.8Gbps switching capacity |
| Transmission
method |
•
802.1d, 802.1w and 802.1s support |
| VLANs |
•
Supports up to 255 Dynamic/ 64 Static VLAN groups (Port-based,
Asymetric Port Based, 802.1q and GARP/GVRP) |
| Access
Control Lists |
• L2/L3/L4 filtering rules based On MAC address,
IP Address, 802.1p, DSCP, TCP/UDP payload, and/or TCP/UDP
port numbers |
| Link
Aggregation |
• 802.3ad and LACP support |
| Port
Security |
•
Port lock down to MAC Address |
| IGMP
Snooping |
• Supports up to 128 L2 Multicast Groups |
| Interface |
• 10/100BASE-TX Ports: 24
• Combo 10/100/1000BASE-T Ports/SFP Slots: 2
• Auto-Negotiation of Network Speeds (RJ-45 Ports):
Yes
• Auto-MDI/MDIX (RJ-45 Ports): Yes
• RS-232 Console Port: Yes |
| Power |
•
Internal Power Supply: DC to DC
• Power Input: 100 to 240VAC, 10A, 50 to 60Hz
• Power Output: 12VDC, 5A (max.)
• Power Consumption: 23 watts (max.)
• Optional Redundant Power Supply: Yes |
| Performance |
•
Switching Capacity: 8.8Gbps
• Max. 64-Byte System Packet Forwarding Rate:
6.6Mpps
• MAC Address Table: 8 K
• Packet Buffer Size: 16MB |
| Diagnostic
LEDs |
•
10Mbps or 100Mbps Speed (Per Ethernet Port): Yes
• 10/100Mbps or 1000Mbps Speed (Per Gigabit Port):
Yes
• Link/Activity (Per Port): Yes
• Power, Console, RPS (Per Device): Yes |
| Physical/Environmental |
•
Ventilation DC Fans: 40 x 40 mm x 1
• BTU/Hr.: 73.8
• Dimensions: 441 x 207 x 44 mm
• Size: 19-Inch Standard Rack- Mount Width, 1U
Height
•Weight: 2.56 kg (5.64 lbs)
• Operating Temperature: 0 to 40 C
• Storage Temperature: -40 to 70 C
• Humidity: 5 to 95% Non-Condensing
•EMI: FCC Class A, CE, C-Tick
• Safety: CSA International
• MTBF: 53,838 Hours
• Acoustic (Refer to ISO-7779): < 34dB |
| SOFTWARE
FUNCTIONS |
• VLAN: IEEE 802.1Q Tagged VLAN, Port-based VLAN,
GARP/GVRP, Maximum number of VLANs per device: 255 VLANs
(static and dynamic combined)
• Priority Queues (CoS): Standard: IEEE 802.1p,
Number of queues: 4
• Traffic Classification (CoS): Can be based on
user-definable application types - TOS - Diffserv (DSCP)
- Port-based - MAC address - IP address - TCP/UDP port
number
• Access Security: Port security (64 MAC addresses
max.), 802.1x port-based access control, 802.1x MAC-based
access control, SSH v.1, v.2, SSL, Per port traffic
segmentation, IP-MAC-Port binding: 512 entries |
| We
provide 24, 48 port Managed Switches |
|
|
| |
| KVM
Switch |
|
| TECHNICAL
SPECIFICATIONS |
| Computer
Control |
•
16 |
| Display
Indicators |
•
1 Bank LED
1 Port LED |
| Console
Connectors |
•
Keyboard: 6-pin Mini-DIN Female PS/2
• Mouse: 6-pin Mini-DIN Female PS/2
• Monitor: 15-pin HDDB Female VGA, SVGA, XGA, MultiSync |
| Monitor
Resolution Support |
•
Up to 1920 x 1440 |
| Switching
Control |
• Hot Keys
• Push Buttons
• On Screen Display |
| Switching
Notification |
• Audio Beep |
| Scanning
Interval |
• 5-99 sec |
|
Power |
•
12V 1A AC Adapter |
|
Dimensions |
• Length 16 in (406 mm)
• Width 9 in (229 mm)
• Height 3.25 in (83 mm)
• Weight 123oz (3.5kg) |
| Rack
Mount |
• 19" RackMountable. Kit Included |
|
Cascade Port |
•
1 Daisy Chain Port to Cascade
Up to 8 Server Computers |
| Operating
Temp |
•
32ºF to 122ºF (0ºC to 50ºC) |
| Diagnostic
LEDs |
•
10Mbps or 100Mbps Speed (Per Ethernet Port): Yes
• 10/100Mbps or 1000Mbps Speed (Per Gigabit Port): Yes
• Link/Activity (Per Port): Yes
• Power, Console, RPS (Per Device): Yes |
| Storage
Temp |
•
-4ºF to 140ºF (-20ºC to 60ºC) |
| Operating
Humidity |
• 0% to 80% Non-Condensing |
| Storage
Humidity |
• 0% to 80% Non-Condensing |
| Certifications |
•
FCC, CE |
| Minimum
Requirements |
•
Console
• One VGA, SVGA, or Multisync Monitor
• One PS/2 Keyboard
• One PS/2 Mouse |
|
Computers |
•
One VGA, SVGA, or MultiSync Video Card or Port
• One PS/2(6-pin Mini-DIN) Mouse port
• One PS/2((6-pin Mini-DIN) Keyboard port |
| We
provides 8,16 port KVM Switches |
|
| |
Wireless
Products
